
Add to Cart
3mm,6mm,10mm Insulation Glass Fiber Aerogel Blanket For Furnace Foundry
DESCRITION
Aerogel Inaulation Blanket is one of our hot sale products.It has chosen the acupuncture fiber as substrate, and then the aerogel is compounded into the substrate. It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties. The thermal conductivity at room temperature in 0.016 (W/m.K), is lower than the static air; The aerogel product is of high hydrophobicity; at room temperature, the water repellent rate of can be up to 99%; Excellent flame retardant performance, and fire rating has met the national A1 standard. And the temperature of the product using range is wide, Joda Aerogel fiberglass blanker could be used according to the different requirements in -200 ~ 650 DEG C for adiabatic pipe and tank, using the furnace of industrial equipment and pipeline.
SPECIFICATION
Thickness | Thickness |
Roll Length | 36M or as request |
Width | 1500MM or as request |
Color | Beige |
Use Temperature | -50~650 C |
Dimensional Stability(GB/T8811) | 1% |
Reshrinking Temperature(GB/T11835) | 800 C |
Compressive Property(GB/T13480) | @10%,20Kpa |
@25%,150Kpa | |
Flame Rating(GB/T8624) | A |
Tensile strength(GB/T17911) | 1000KPa |
Thermal conductivity(GB/T 10295) | 25C,0.020W/(M·K) |
200C,0.028W/(M·K) | |
300C,0.035W/(M·K) | |
400C,0.044W/(M·K) | |
500C,0.069W/(M·K) | |
650C,0.095W/(M·K) |
If you have any question or demands,kindly contact our prefessional team,we will give you the best solution according to your machine,operation temperature and our rich production experience.
ADVANTAGES
--Lower thermal conductivity coefficient
Thermal conductivity coefficient less than 0.016w/(m,k)at room temperature,
several times or even dozens of times lower than traditional heat preservation materials, and with better heat preservation effect.
--Thinnest and lightest thermal insulating material
Under the same heat preservation effect, the dosage of our company’s SiO2 aerogel composite material is only 1/5 to 1/3 of traditional materials’ . So it can be applied to dense pipeline and narrow space and achieve a good effect of heat or cold preservation. And greatly convenient for installation and save the cost of the protective layer.
--Water-proof and moisture-proof,easy to store
It is hydrophobic and porous with hydrophobicity of 99%.
--superior fireproof performance with safety class of gr.A1
SiO2 aerogel composite material has excellent fire resistance and smoke resistance. In a fire or accident, this property can well protect the pipeline and equipment and fight for more time for disaster relief and response.
--resistant to high pressure,acceptable brutal construction
--As a new green and environmentally friendly material, it can be safely used and easily installed.
The rolled SiO2 aerogel insulation composite can meet the needs of all shape or design,and it’s easy to cut and install according to the comples shapes, bending and space limitations.
APPLICATION
Petroleum, Chemical Industry, Electric Power etc. in the Pipeline and Equipment Insulation, be used in Aeronautics and Astronautics Fields.
FEATURE
It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.