Paper Making Machine Parts - Air Cushion Type Headbox for Paper Machinery
The headbox is composed of distributed pulp device, well-distributed pulp device, lip device, box body, air supply system and computer control system.
1)distributed pulp device
The distributed pulp device adopts the tapered main pipe to enter the pulp, and the three steps diffuse the pulp. The tapered header is composed of inlet flange, large end connection pipe, conical main body, small end connection pipe and outlet flange.
The tapered header is equipped with a pressure balance indicator tube, which is convenient to adjust the pressure balance of the tapered header into the pulp.
2)well-distributed pulp device
The well-distributed pulp device is two doctor rollers (lip doctor roller and throat doctor roller), with double spiral holes and quality stainless steel pipe (304).
The parameters such as the diameter of the doctor roller and the opening rate are determined according to the process requirements.
3)lip device
The lip device is composed of upper and lower lip plates, fine-tuning mechanism and lip opening indicator.The upper lip plate is a special joint structure. Can up and down, before and after adjustment lip opening.
Main Technical Parameters
| Trimmed Width (mm) | 3200 | 3600 | 3800 |
| Width of Jet (mm) | 3350 | 3800 | 4050 |
| Work Speed (m/min) | 200-300 | 200-300 | 200-300 |
| Diameter of holy roll (mm) | 220 |
| Cloth Paste Way | Square taper pipe into the slurry,cloth pulp by the organic glass holey plate |
| Outline size (m) | 2.6*4.4*1.6 | 2.6*4.4*1.6 | 2.6*5*1.6 |
| Arrangement | Left or right hand machine
|
